GYEON Q²M "PPF" Slip PPF-Slip-Solution / Lubricant for Paint Protection Film 1000ml

Precise PPF Edge Positioning – GYEON Q²M PPF Slip

What is GYEON Q²M PPF Slip? GYEON Q²M PPF Slip is a specialized slip solution for edge positioning and final securing of paint protection films on edges and corners – it allows precise tucking of the film under flanges and ensures a clean, durable edge bond.

While Q²M PPF Lift keeps the film mobile and allows positioning on large surfaces, GYEON Q²M PPF Slip is developed for a different phase of PPF installation: the precise working and tucking of film edges under flanges to professionally finish door edges, sills, bumpers, and A-pillars. PPF Slip ensures that the film adheres perfectly in this critical area and lasts permanently.

• Specifically developed for edge finishing and tucking of PPF. The slip solution has a different viscosity and composition than PPF Lift – it is optimized for precise work on edges, gaps, and flanges, where controlled gliding with faster adhesion is desired.
• Prevents film edges from lifting. One of the most common PPF installation errors is film edges lifting after a few weeks or months – often because the edge was not properly worked in. PPF Slip enables a clean edge attachment that lasts permanently.
• Suitable for all PPF edge types. Whether tucking under flanges, securing in door gaps, or working on complex geometries – Q²M PPF Slip is designed for all situations where a film edge needs to be cleanly finished.

Practical tip from Detailing1: Use PPF Slip sparingly and precisely – too much slip solution on the edge can delay the curing of the adhesive layer. The ideal working technique: spray slip onto the edge, push the film under the flange with a thin tucking tool, then firmly press the edge with a squeegee or finger. Immediately remove excess slip with a microfiber cloth after tucking. For subsequent care: Q²M PPF Wash for the first wash after 48 hours.

The Edge Problem in PPF Installations

Film edges are the most critical zone of any PPF installation. At edges, film and paint meet under tension – if the adhesive layer does not adhere completely and permanently here, the film begins to lift. Once lifted, moisture and dirt accumulate under the edge, accelerating the detachment process. GYEON Q²M PPF Slip is the solution to this problem: It enables the precise tucking of the edge with sufficient control and ensures a permanent, tight bond between the film and paint at the edge – the most critical point of the installation.

Difference between PPF Lift and PPF Slip: When to use which product?

PPF Lift and PPF Slip fulfill different functions in PPF installation. Q²M PPF Lift is used in Phase 1 – when the film is positioned and aligned on the large surface. It keeps the film mobile for a long time and allows plenty of time for precise work. Q²M PPF Slip, on the other hand, is used in Phase 2 – when the film edges are finally worked, tucked, and permanently secured. Both products together form a complete slip solution system for professional PPF installations.

Application of Q²M PPF Slip in Practice

After positioning the film with Q²M PPF Lift on the main surface, work the edges with Q²M PPF Slip. Spray slip sparingly onto the film edge and the underlying body area. Use a suitable tucking tool to push the film under flanges or into gaps. Press the film edge evenly with a squeegee or finger – working from the center to the edge to displace air bubbles. Blot off excess slip immediately with a clean microfiber cloth. Do not wet the treated edges with water for at least 24 hours.

Q²M PPF Slip for various vehicle areas

Particularly common areas of use for Q²M PPF Slip: door sills and door edges (where film lifts most frequently), bumper edges (especially when tucking behind bumpers), mirror edges, A-pillars, and rocker panel edges. For vehicles with complex geometries and many curves, a good slip solution on the edges is particularly important – PPF Slip also allows clean processing here. As a supplement to the PPF system: Q²M PPF Wash for ongoing care and Q²M PPF Maintain for sealant refreshing.

Purchase Recommendation: The PPF Installation Duo Lift + Slip

GYEON Q²M PPF Slip is a mandatory product for anyone who installs PPF professionally or even wants to apply PPF to a vehicle themselves. In combination with Q²M PPF Lift, it forms the ideal slip solution duo for all phases of PPF installation. The complete GYEON PPF system includes: PPF Lift + Slip for installation, Q²M PPF Wash for care, Q²M PPF Maintain for refreshing, and Q² PPF EVO as a ceramic coating.